compressive stress

Thus, under the same bolt tension, reduce narrow smooth surface after the compressive stress will increase.

这样, 在螺栓张力相同的情况下, 缩小后的窄光滑面的压紧应力就会增大.

Destruction mechanism of rock included crack under compressive stress condition had been discussed.

探讨了含有裂隙的岩石在压缩状态下的破坏机制.

When compressive stress reaches zero, a critical value of the post-peak Poisson's ratio is achieved.

当压缩应力降至零时, 峰后泊松比达到临界值.

A unified numerical expression of the compressive stress-strain curve applicable to concrete is put forward.

研究了自密实混凝土在受压过程中的变形,建议了适用于受压应力 — 应变曲线的数学表达式.

( b) For concrete in compression zone a stress-strain relation for repeated axial compressive cyclic loading, is adopted instead of that for reversed loading.

对混凝土受压区采用轴向重复加载的应力-应变关系而不是反复加载的。

Influence of heat treatment on the compressive stress effect of magnetostriction of < 112> axial aligned Tb-Dy-Fe alloys

热处理对＜112＞轴向取向Tb－Dy－Fe合金磁致伸缩压力效应的影响

The compressive strength and deformation tests for Lytag concrete specimens are carried out under 4 kinds of lateral stress levels and 4 stages of freeze-thaw cycle in a concrete static and dynamic tri-axial test system.

利用混凝土静、动三轴试验系统，完成了粉煤灰陶粒混凝土立方体试件在4组不同冻融循环次数、4种恒定侧压下的双轴压压强度和变形性能试验。

The research showed that there was residual compressive stress in the ceramics layers.

研究发现,叠层复合材料中陶瓷层存在较大残余压应力.

In accordance with the orientation, northeast and north northeast, of principal compressive stress in North China, the dominant orientation of the fast S wave polarization is northeast before the earthquake.

震前快S波偏振优势取向为北东向，符合华北地区主压应力方向为北东向和北北东向的特征。

The compressive stress of general polyamine soft foam plastic is improved with polymer polybasic alcohol.

为了改善普通聚氨酯软泡的压陷性能,采用添加聚合物多元醇,并对照其添加前后的物性.

Experiment shows, polymer polybasic alcohol can effectively enhance the compressive stress of polyamine soft foam plastic.

研究结果表明:聚合物多元醇能有效地提高聚氨酯软泡的压陷性能.

The mechanics behavior of membrane material under residual stress and compressive stress has been studied.

涉及力学问题有薄膜材料在残余应力和外载荷作用下的变形、应力、断裂和屈曲等.

Stress measurement anomaly distribute in four quadrants, the regions of tensile and compressive forces are related to the focal mechanism solution;

临震前应力测量异常显示四象限空间分布，张、压区域与震源机制解有明显相关性；

The residual compressive stress is beneficial to fatigue strength.

表层残余压力对工件的疲劳强度起着有益的作用.

The strain rate has little effect on the compressive stress parallel to the direction of pores.

藕状多孔铜沿平行气孔方向静态压缩时应力—应变曲线受应变速率影响很小.